dc.contributor.author |
Mutombo, K
|
|
dc.contributor.author |
Rossouw, P
|
|
dc.contributor.author |
Govender, G
|
|
dc.date.accessioned |
2014-02-13T08:49:01Z |
|
dc.date.available |
2014-02-13T08:49:01Z |
|
dc.date.issued |
2011-06 |
|
dc.identifier.citation |
Mutombo, K, Rossouw, P and Govender, G. 2013. Chemically milled alpha-case layer from Ti-6Al-4V alloy investment cast. In: 5th International Light Metals Technology Conference 2011 (LMT), Lüneburg, Germany, 19-22 July 2011 |
en_US |
dc.identifier.uri |
http://www.scientific.net/MSF.690.477
|
|
dc.identifier.uri |
http://hdl.handle.net/10204/7193
|
|
dc.description |
5th International Light Metals Technology Conference 2011 (LMT), Lüneburg, Germany, 19-22 July 2011. Abstract only attached. |
en_US |
dc.description.abstract |
The as cast Ti6Al4V, obtained after investment casting with yttria stabilized zirconia face-coat, was chemically milled using a mixture of hydrofluoric acid and nitric acid. This process removed completely the alpha-case layer. Lower hardness and almost no oxygen contamination are revealed after microhardness measurement, Energy dispersive X-ray and X-ray diffraction analysis. The hydrofluoric acid/nitric acid ratio, pickled Ti6Al4V surface, pickling efficiency, pickling rate, immersion time and solution temperature are discussed. |
en_US |
dc.language.iso |
en |
en_US |
dc.publisher |
Trans Tech Publications |
en_US |
dc.relation.ispartofseries |
Workflow;6052 |
|
dc.subject |
Alpha-case |
en_US |
dc.subject |
Investment casting |
en_US |
dc.subject |
Chemical milling |
en_US |
dc.subject |
Yttria stabilized zirconia face-coat |
en_US |
dc.subject |
Alloys |
en_US |
dc.title |
Chemically milled alpha-case layer from Ti-6Al-4V alloy investment cast |
en_US |
dc.type |
Article |
en_US |
dc.identifier.apacitation |
Mutombo, K., Rossouw, P., & Govender, G. (2011). Chemically milled alpha-case layer from Ti-6Al-4V alloy investment cast. http://hdl.handle.net/10204/7193 |
en_ZA |
dc.identifier.chicagocitation |
Mutombo, K, P Rossouw, and G Govender "Chemically milled alpha-case layer from Ti-6Al-4V alloy investment cast." (2011) http://hdl.handle.net/10204/7193 |
en_ZA |
dc.identifier.vancouvercitation |
Mutombo K, Rossouw P, Govender G. Chemically milled alpha-case layer from Ti-6Al-4V alloy investment cast. 2011; http://hdl.handle.net/10204/7193. |
en_ZA |
dc.identifier.ris |
TY - Article
AU - Mutombo, K
AU - Rossouw, P
AU - Govender, G
AB - The as cast Ti6Al4V, obtained after investment casting with yttria stabilized zirconia face-coat, was chemically milled using a mixture of hydrofluoric acid and nitric acid. This process removed completely the alpha-case layer. Lower hardness and almost no oxygen contamination are revealed after microhardness measurement, Energy dispersive X-ray and X-ray diffraction analysis. The hydrofluoric acid/nitric acid ratio, pickled Ti6Al4V surface, pickling efficiency, pickling rate, immersion time and solution temperature are discussed.
DA - 2011-06
DB - ResearchSpace
DP - CSIR
KW - Alpha-case
KW - Investment casting
KW - Chemical milling
KW - Yttria stabilized zirconia face-coat
KW - Alloys
LK - https://researchspace.csir.co.za
PY - 2011
T1 - Chemically milled alpha-case layer from Ti-6Al-4V alloy investment cast
TI - Chemically milled alpha-case layer from Ti-6Al-4V alloy investment cast
UR - http://hdl.handle.net/10204/7193
ER -
|
en_ZA |