Fuel cells are well-known electric generating devices which have higher energy conversion efficiency than heat engines and less exhaustion of carbon dioxide (CO2)1. There are several types of fuel cells. Solid oxide fuel cells (SOFC) and molten carbonate fuel cells (MCFC) have high efficiency. SOFC and MCFC can contribute towards decreasing the amount of exhausting CO2 due to generation of electricity however; miniaturising and portability are very difficult because of their high operating temperatures. Phosphoric acid fuel cell (PAFC) has lower operating temperatures than SOFC and MCFC and is expected for local area use. However, its liquid electrolyte is not suitable for mobile use. Polymer electrolyte fuel cell (PEFC) with solid polymer electrolyte membrane works around 100 °C. PEFCs are good at quick-start and stop. Therefore PEFCs are expecting as an alternative energy system for mobile use. PEFCs are widely studied and expected to be produced for practical use. However, there are serious problems for PEFC (using proton exchange membrane) concerning the increasing cost of platinum catalysts and decreasing amount of platinum resources2. Alkaline membrane fuel cells (AMFC) have recently been receiving a lot of attention among the different types of fuel cells. The alkaline systems potentially offer advantages in that they do not require much noble metal catalyst as acidic systems; have faster reaction kinetics (enabling higher power densities); can better limit fuel cross-over; and cost less than proton exchange membrane systems using alcohol as fuel. Many anion exchange membranes based on quaternised polymers have been developed and studied for AMFC3-5. The quaternary ammonium functional groups are the anion conductors in the membranes. However, the performance of AMFC based on this type of membrane is still low due to easy degradation in alkaline medium at temperatures above 60 °C. Nevertheless, the development of anion exchange membranes for AMFC is still in the early stage. It is still required to develop the anion exchange membranes for an improved performance of AMFC6. The aim of this work is to prepare the anion exchange membrane based on polyvinyl alcohol (PVA) and sulfonated polyetheretherketone (SPEEK), and studies its properties for AMFC application.
Reference:
Luo, H, Modibedi, M, Ramulifho, T and Mathe, M. 2010. Polyvinyl alcohol (PVA) and sulfonated polyetheretherketone (SPEEK) anion exchange membrane for fuel cell. CSIR 3rd Biennual Conference 2010, Science Real and Relevant, CSIR International Convention Center, Pretoria, South Africa, pp 1
Luo, H., Modibedi, R. M., Ramulifho, T., & Mathe, M. K. (2010). Polyvinyl alcohol (PVA) and sulfonated polyetheretherketone (SPEEK) anion exchange membrane for fuel cell. CSIR. http://hdl.handle.net/10204/4237
Luo, H, Remegia M Modibedi, T Ramulifho, and Mahlanyane K Mathe. "Polyvinyl alcohol (PVA) and sulfonated polyetheretherketone (SPEEK) anion exchange membrane for fuel cell." (2010): http://hdl.handle.net/10204/4237
Luo H, Modibedi RM, Ramulifho T, Mathe MK, Polyvinyl alcohol (PVA) and sulfonated polyetheretherketone (SPEEK) anion exchange membrane for fuel cell; CSIR; 2010. http://hdl.handle.net/10204/4237 .